Directorio
DOMINGO MORALES PALMA
Categoría
Profesor Titular de Universidad
Departamento
Área
Ingeniería de los Procesos de Fabricación
Docencia
Asignaturas que imparte
- Diseño y Fabricación Asistidos por Ordenador
- Ingeniería de Fabricación
- Procesos de Fabricación Aeronáutica
- Sistemas Integrados de Fabricación
- Sistemas Integrados de Fabricación
- Sistemas Integrados de Fabricación
- Sistemas Integrados de Fabricación
- Sistemas Integrados de Fabricación
- Sistemas Integrados de Fabricación
- Sistemas Integrados de Fabricación
Investigación
Grupo de investigación
INGENIERIA MECANICA (INGENIERIA MECANICA)
Proyectos y contratos de investigación
SIMULACIÓN DEL COMPORTAMIENTO DEL CORAZÓN Y PERIFERIA VASCULAR EN CONDICIONES SANAS Y PATOLÓGICAS. APLICACIÓN AL DISEÑO Y EVALUACIÓN DE DISPOSITIVOS I (DPI2004-07410-C03-03 - Investigador/a)
ANÁLISIS DE PREDICCIÓN DEL FALLO EN EL CORFOMADO DE CHAPAS DE USO AERONÁUTICO: INFLUENCIA DE LA FLEXIÓN Y DE LA HISTORIA DE CARGA (DPI2006-06921 - Investigador/a)
AYUDA A LA CONSOLIDACIÓN DE GRUPOS DE INVESTIGACIÓN. CONVOCATORIA 2005/TEP111 (18.28.05.29.15.2006/268 - Investigador/a)
AYUDA A LA CONSOLIDACIÓN DE GRUPOS DE INVESTIGACIÓN. CONVOCATORIA 2006/TEP111 (2006/TEP111 1828052919 - Investigador/a)
AYUDA A LA CONSOLIDACIÓN DE GRUPOS DE INVESTIGACIÓN. CONVOCATORIA 2007/TEP111 (2007/TEP111 1828052922 - Investigador/a)
ANÁLISIS DEL EFECTO COMBINADO TRACCIÓN-FLEXIÓN EN PROCESOS DE CONFORMADO DE CHAPA METÁLICA.DPI2009-13335 (DPI2009-13335 - Investigador/a)
MEJORA DE PRODUCTOS Y DE PROCESOS DE FABRICACIÓN DE ENVASES ECOLÓGICOS POR INTRODUCCIÓN DE NUEVAS TECNOLOGÍAS (DPI2000-0111-P4-02 - Investigador/a)
CREACION DE UNA BASE DE CONOCIMIENTOS PARA LA OPTIMIZACION DEL DISEÑO DEL PROYECTO DEL PROCESO DE FABRICACION DE ENVASES PARA PRODUCTOS AGROALIMENTARI (USE-MONTE.00-1 - Investigador/a)
SISTEMA DE ENCOFRADO CON MATERIAL 3R: PROYECTO SEM-3R (TI-356/2003 - Investigador/a)
Jigless Techniques & Flexible Tooling for Assembly Applications (NEBULA+) (PI-1842/20/2018 - Investigador/a)
Nébula - Nueva generación de sistemas de ensamblaje flexibles ultraligeros (Feder Innterconecta - MC2) (PI-1602/20/2016 - Investigador/a)
Nuevos Desarrolos Industriales de Tecnologías de Conformado de Chapa Metálica (PI-1792/20/2018 - Investigador/a)
Digital Manufacturing and Virtual factory in the Aeronautical Industry using 3DExperience (PI-1753/20/2017 - Responsable)
Fabricación de prototipo de wheelset de ferrocarril a escala reducida para inspección (ES-1262/2014 - Investigador/a)
Fabricación de prototipo de conjunto doble wheelset- vagón a escala reducida (ES-1299/2014 - Investigador/a)
Value Chain: From IDMU to LEAN documentation for assembly (ARIADNE) (PI-1498/20/2016 - Coordinador)
Nébula - Nueva generación de sistemas de ensamblaje flexibles ultraligeros (PI-1602/20/2016 - Investigador/a)
Nébula - Nueva generación de sistemas de ensamblaje flexibles ultraligeros (PI-1601/20/2016 - Investigador/a)
Nébula - Nueva generación de sistemas de ensamblaje flexibles ultraligeros (Feder Innterconecta - AIRBUS DS) (PI-1601/20/2016 - Investigador/a)
MINERVA-Manufacturing Industrial-means Emerging from validated Automation (PI-1375-09-2015 - Investigador/a)
Proceso de Conformado Incremental para el Rebordeado de Chapas de Aluminio de Ductilidad Reducida y Láminas Poliméricas: Mejora de la Conformabilidad (DPI2015-64047-R - Investigador/a)
Análisis del Proceso de Conformado Incremental Mono-Punto de Chapa y su Aplicación al Rebordeado de Agujeros (Hole Flanging) (DPI2012-32913 - Investigador/a)
Desarrollo e Investigación de Nuevas Tecnologías para la Automatización de los Procesos de Montaje Aeronáutico (PI-1033/2012 - Investigador/a)
Desarrollo de un nuevo método de realización de puntos de conexión a masa y retorno de corriente (AMASA) (PI-1212/20/2013 - Investigador/a)
Libros publicados
Morales-Palma, Domingo:
Análisis del efecto de la flexión en la conformabilidad de chapas metálicas. Universidad de Sevilla. 2011. 9788469480151
Análisis del efecto de la flexión en la conformabilidad de chapas metálicas. Universidad de Sevilla. 2011. 9788469480151
Capítulos en Libros
Morales-Palma, Domingo;Eguía-Salinas, Ignacio;Oliva, Manuel;MAS-MORATE, FERNANDO;Vallellano-Martin, Carpoforo:
Managing Maturity States in a Collaborative Platform for the iDMU of Aeronautical Assembly Lines. Pág. 667-676. Springer. Springer. 2017.
Managing Maturity States in a Collaborative Platform for the iDMU of Aeronautical Assembly Lines. Pág. 667-676. Springer. Springer. 2017.
Oliva, Manuel;Racero-Moreno, Jesús;Morales-Palma, Domingo;Del Valle-Sevillano, Carmelo;MAS-MORATE, FERNANDO:
Value Chain: From iDMU to Shopfloor Documentation of Aeronautical Assemblies. Pág. 106-115. Springer. Springer. 2017.
Value Chain: From iDMU to Shopfloor Documentation of Aeronautical Assemblies. Pág. 106-115. Springer. Springer. 2017.
G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Silva, M. Beatriz;Martins, Paulo A. F.:
Novel experimental techniques for the determination of the forming limits at necking and fracture. Pág. 1-24. Woodhead/Elsevier. Woodhead/Elsevier. 2015.
Novel experimental techniques for the determination of the forming limits at necking and fracture. Pág. 1-24. Woodhead/Elsevier. Woodhead/Elsevier. 2015.
Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier;Morales-Palma, Domingo:
Numerical Analysis of the Deformation Mechanism in Incremental Sheet Forming vs. Stretch-Bending. Pág. 524-529. Sinónimo Desconocido. Sinónimo Desconocido. 2011.
Numerical Analysis of the Deformation Mechanism in Incremental Sheet Forming vs. Stretch-Bending. Pág. 524-529. Sinónimo Desconocido. Sinónimo Desconocido. 2011.
Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier;Vázquez-Valeo, Jesús:
Numerical analysis of the deformation mechanisms in incremental forming of AA2024-T3 sheets. Pág. 740-747. 2011.
Numerical analysis of the deformation mechanisms in incremental forming of AA2024-T3 sheets. Pág. 740-747. 2011.
Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier;Morales-Palma, Domingo:
On the Experimental Detection of Necking in Stretch-Bending Tests. Pág. 500-508. AMERICAN INSTITUTE OF PHYSICS. AMERICAN INSTITUTE OF PHYSICS. 2009.
On the Experimental Detection of Necking in Stretch-Bending Tests. Pág. 500-508. AMERICAN INSTITUTE OF PHYSICS. AMERICAN INSTITUTE OF PHYSICS. 2009.
Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
Strain Gradient Effect in the Failure of Stretch- Bend Metal Sheets. Pág. 1-1. TMT2008. TMT2008. 2008.
Strain Gradient Effect in the Failure of Stretch- Bend Metal Sheets. Pág. 1-1. TMT2008. TMT2008. 2008.
Asistencia a congresos
Suntaxi, Carlos;G. Centeno;Rosa-sainz, Ana;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Numerical Modelling of Conventional and Incremental Forming of Thin-Walled Tube. Ponencia en Congreso. 25th International Conference on Material Forming. BRAGA PORTUGAL. 2022
Numerical Modelling of Conventional and Incremental Forming of Thin-Walled Tube. Ponencia en Congreso. 25th International Conference on Material Forming. BRAGA PORTUGAL. 2022
Arista, Rebeca;MAS-MORATE, FERNANDO;Morales-Palma, Domingo;Oliva, Manuel;Vallellano-Martin, Carpoforo:
A preliminary Ontology-based Engineering application to Industrial System reconfiguration in conceptual phase. Ponencia en Congreso. 11th International Workshop on Formal Ontologies meet Industry. Bolzano, Italy. 2021
A preliminary Ontology-based Engineering application to Industrial System reconfiguration in conceptual phase. Ponencia en Congreso. 11th International Workshop on Formal Ontologies meet Industry. Bolzano, Italy. 2021
Morales-Palma, Domingo;Oliva, Manuel;Racero-Moreno, Jesús;Eguía-Salinas, Ignacio;MAS-MORATE, FERNANDO:
Metamodels approach supporting Models for Manufacturing (MfM) methodology. Ponencia en Congreso. IFIP 18th International Conference on Product Lifecycle Management. Curitiba, Brazil. 2021
Metamodels approach supporting Models for Manufacturing (MfM) methodology. Ponencia en Congreso. IFIP 18th International Conference on Product Lifecycle Management. Curitiba, Brazil. 2021
Flores, G.;Palomo, David;Martínez-Donaire, Andrés Jesús;Borrego, Marcos;López-fernández, José Andrés;Morales-Palma, Domingo;G. Centeno;Vallellano-Martin, Carpoforo:
Design for FDM of flexible tooling for manufacturing aeronautical components by incremental sheet forming. Ponencia en Congreso. 9th Manufacturing Engineering Society International Conference. Gijón, Spain. 2021
Design for FDM of flexible tooling for manufacturing aeronautical components by incremental sheet forming. Ponencia en Congreso. 9th Manufacturing Engineering Society International Conference. Gijón, Spain. 2021
Morales-Palma, Domingo;Borrego, Marcos;López-fernández, José Andrés;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Numerical analysis of necking in stretch-bending based on modified maximum force criteria. Poster en Congreso. 9th Manufacturing Engineering Society International Conference. Gijón, Spain. 2021
Numerical analysis of necking in stretch-bending based on modified maximum force criteria. Poster en Congreso. 9th Manufacturing Engineering Society International Conference. Gijón, Spain. 2021
Borrego, Marcos;Morales-Palma, Domingo;López-fernández, José Andrés;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Revisiting flangeability in hole-flanging by single-stage incremental forming and conventional process. Ponencia en Congreso. 24th International Conference on Material Forming. Liège, Belgium. 2021
Revisiting flangeability in hole-flanging by single-stage incremental forming and conventional process. Ponencia en Congreso. 24th International Conference on Material Forming. Liège, Belgium. 2021
Borrego, Marcos;Morales-Palma, Domingo;López-fernández, José Andrés;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Hole-flanging of AA7075-O sheets: conventional process versus SPIF. Ponencia en Congreso. The 18th International Conference on Metal Forming 2020. Krakow, Poland. 2020
Hole-flanging of AA7075-O sheets: conventional process versus SPIF. Ponencia en Congreso. The 18th International Conference on Metal Forming 2020. Krakow, Poland. 2020
Arista, Rebeca;MAS-MORATE, FERNANDO;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Oliva, Manuel:
Towards Manufacturing Ontologies for Resource Management in the Aerospace Industry. Ponencia en Congreso. 10th International Conference On Interoperability For Enterprise Systems And Applications: "Interoperability in the Era of Artificial Intelligence". Tarbes (France). 2020
Towards Manufacturing Ontologies for Resource Management in the Aerospace Industry. Ponencia en Congreso. 10th International Conference On Interoperability For Enterprise Systems And Applications: "Interoperability in the Era of Artificial Intelligence". Tarbes (France). 2020
Arista, Rebeca;MAS-MORATE, FERNANDO;Oliva, Manuel;Morales-Palma, Domingo:
Applied Ontologies for Assembly System Design and Management within the Aerospace Industry. Ponencia en Congreso. 10th International Workshop on Formal Ontologies meet Industry . Graz, Austria. 2019
Applied Ontologies for Assembly System Design and Management within the Aerospace Industry. Ponencia en Congreso. 10th International Workshop on Formal Ontologies meet Industry . Graz, Austria. 2019
Arista, Rebeca;MAS-MORATE, FERNANDO;Oliva, Manuel;Racero-Moreno, Jesús;Morales-Palma, Domingo:
Framework to support Models for Manufacturing (MfM) methodology. Ponencia en Congreso. 9th IFAC Conference on Manufacturing Modelling, Management and Control. BERLIN - GERMANY. 2019
Framework to support Models for Manufacturing (MfM) methodology. Ponencia en Congreso. 9th IFAC Conference on Manufacturing Modelling, Management and Control. BERLIN - GERMANY. 2019
López-fernández, José A.;G. Centeno;Borrego, Marcos;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Numerical study of formability and failure prediction in shrink and stretch flanging by SPIF. Ponencia en Congreso. The 13th International Conference on Numerical Methods in Industrial Forming Processes. Portsmouth, New Hampshire, USA. 2019
Numerical study of formability and failure prediction in shrink and stretch flanging by SPIF. Ponencia en Congreso. The 13th International Conference on Numerical Methods in Industrial Forming Processes. Portsmouth, New Hampshire, USA. 2019
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Borrego, Marcos;López_fernández, José A.;G. Centeno;Vallellano-Martin, Carpoforo:
Analysis of stress triaxiality on the formability of hole-flanged parts by SPIF. Ponencia en Congreso. The 13th International Conference on Numerical Methods in Industrial Forming Processes. Portsmouth, New Hampshire, USA. 2019
Analysis of stress triaxiality on the formability of hole-flanged parts by SPIF. Ponencia en Congreso. The 13th International Conference on Numerical Methods in Industrial Forming Processes. Portsmouth, New Hampshire, USA. 2019
Martínez-Donaire, Andrés Jesús;Martínez-palmeth, Luis H;Borrego, Marcos;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Analysis of the failure of H240LA steel sheets subjected to stretch-bending conditions. Comunicación en congreso. 8th Manufacturing Engineering Society International Conference. Madrid. 2019
Analysis of the failure of H240LA steel sheets subjected to stretch-bending conditions. Comunicación en congreso. 8th Manufacturing Engineering Society International Conference. Madrid. 2019
MAS-MORATE, FERNANDO;Racero-Moreno, Jesús;Oliva, Manuel;Morales-Palma, Domingo:
Preliminary ontology definition for aerospace assembly lines in Airbus using Models for Manufacturing methodology. Ponencia en Congreso. International Conference on Changeable, Agile, Reconfigurable and Virtual Production. Nantes, France. 2018
Preliminary ontology definition for aerospace assembly lines in Airbus using Models for Manufacturing methodology. Ponencia en Congreso. International Conference on Changeable, Agile, Reconfigurable and Virtual Production. Nantes, France. 2018
Morales-Palma, Domingo;Borrego, Marcos;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Numerical study on the thickness homogenization in hole-flanging by single-point incremental forming. Ponencia en Congreso. The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Tokyo, Japan. 2018
Numerical study on the thickness homogenization in hole-flanging by single-point incremental forming. Ponencia en Congreso. The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Tokyo, Japan. 2018
Morales-Palma, Domingo;MAS-MORATE, FERNANDO;Racero-Moreno, Jesús;Vallellano-Martin, Carpoforo:
A preliminary study of Models for Manufacturing (MfM) applied to Incremental Sheet Forming. Ponencia en Congreso. 15th International Conference on Product Lifecycle Management . Torino, Italy. 2018
A preliminary study of Models for Manufacturing (MfM) applied to Incremental Sheet Forming. Ponencia en Congreso. 15th International Conference on Product Lifecycle Management . Torino, Italy. 2018
Morales-Palma, Domingo;MAS-MORATE, FERNANDO;Racero-Moreno, Jesús;Oliva, Manuel:
A preliminary methodological approach to Models for Manufacturing (MfM). Ponencia en Congreso. 15th International Conference on Product Lifecycle Management . Torino, Italy. 2018
A preliminary methodological approach to Models for Manufacturing (MfM). Ponencia en Congreso. 15th International Conference on Product Lifecycle Management . Torino, Italy. 2018
G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Experimental and numerical analysis of the flanging process by SPIF. Ponencia en Congreso. The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Tokyo, Japan. 2018
Experimental and numerical analysis of the flanging process by SPIF. Ponencia en Congreso. The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Tokyo, Japan. 2018
Martínez-Donaire, Andrés Jesús;Borrego, Marcos;Morales-Palma, Domingo;G. Centeno;Vallellano-Martin, Carpoforo:
Hole Expansion of A High Strength Steel Sheet. Comunicación en congreso. The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Tokyo, Japan. 2018
Hole Expansion of A High Strength Steel Sheet. Comunicación en congreso. The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Tokyo, Japan. 2018
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Borrego, Marcos;G. Centeno;Vallellano-Martin, Carpoforo:
On the effect of stress state on the failure limits of hole- flanged parts formed by SPIF. Ponencia en Congreso. The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Tokyo, Japan. 2018
On the effect of stress state on the failure limits of hole- flanged parts formed by SPIF. Ponencia en Congreso. The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Tokyo, Japan. 2018
Oliva, Manuel;Racero-Moreno, Jesús;Morales-Palma, Domingo;Del Valle-Sevillano, Carmelo;MAS-MORATE, FERNANDO:
Value chain: from iDMU to shopfloor documentation of aeronautical assemblies. Ponencia en Congreso. 14th International Conference on Product Lifecycle Management. Sevilla (España). 2017
Value chain: from iDMU to shopfloor documentation of aeronautical assemblies. Ponencia en Congreso. 14th International Conference on Product Lifecycle Management. Sevilla (España). 2017
Morales-Palma, Domingo;Eguía-Salinas, Ignacio;Oliva, Manuel;MAS-MORATE, FERNANDO;Vallellano-Martin, Carpoforo:
Managing maturity states in a collaborative platform for the iDMU of aeronautical assembly lines. Ponencia en Congreso. 14th International Conference on Product Lifecycle Management. Sevilla (España). 2017
Managing maturity states in a collaborative platform for the iDMU of aeronautical assembly lines. Ponencia en Congreso. 14th International Conference on Product Lifecycle Management. Sevilla (España). 2017
Morales-Palma, Domingo;Borrego, Marcos;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Preliminary investigation on homogenization of the thickness distribution in hole-flanging by SPIF. Ponencia en Congreso. 7th Manufacturing Engineering Society International Conference. Vigo (España). 2017
Preliminary investigation on homogenization of the thickness distribution in hole-flanging by SPIF. Ponencia en Congreso. 7th Manufacturing Engineering Society International Conference. Vigo (España). 2017
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Borrego, Marcos;G. Centeno;Vallellano-Martin, Carpoforo:
Numerical Explicit Analysis of Hole Flanging by Single-Stage Incremental Forming. Ponencia en Congreso. 7th Manufacturing Engineering Society International Conference. Vigo (España). 2017
Numerical Explicit Analysis of Hole Flanging by Single-Stage Incremental Forming. Ponencia en Congreso. 7th Manufacturing Engineering Society International Conference. Vigo (España). 2017
G. Centeno;Bagudanch, Isabel;Morales-Palma, Domingo;García-romeu, María Luisa;González-pérez-somarriba, Borja;Martínez-Donaire, Andrés Jesús;Gonzalez-Perez, Luis Miguel;Vallellano-Martin, Carpoforo:
Recent approaches for the manufacturing of polymeric cranial prostheses by incremental sheet forming. Ponencia en Congreso. 17th International Conference on Sheet Metal. Palermo (Italia). 2017
Recent approaches for the manufacturing of polymeric cranial prostheses by incremental sheet forming. Ponencia en Congreso. 17th International Conference on Sheet Metal. Palermo (Italia). 2017
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;G. Centeno;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Enseñanza-Aprendizaje de Procesos de Conformado de Chapa Mediante DEFORM-3D. Ponencia en Congreso. 24 Congreso de Innovación Educativa en las Enseñanzas Técnicas (2016). Cádiz, España. 2016
Enseñanza-Aprendizaje de Procesos de Conformado de Chapa Mediante DEFORM-3D. Ponencia en Congreso. 24 Congreso de Innovación Educativa en las Enseñanzas Técnicas (2016). Cádiz, España. 2016
Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;G. Centeno;Borrego, Marcos:
Teaching & learning of sheet metal forming processes using DEFORM-3D. Ponencia en Congreso. 24th University Educational Innovation Congress on Technical Education. Cadiz. 2016
Teaching & learning of sheet metal forming processes using DEFORM-3D. Ponencia en Congreso. 24th University Educational Innovation Congress on Technical Education. Cadiz. 2016
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Experiencia docente de simulación de procesos de fabricación en máquinas de control numérico. Comunicación en congreso. 24 Congreso de Innovación Educativa en las Enseñanzas Técnicas (2016). Cádiz, España. 2016
Experiencia docente de simulación de procesos de fabricación en máquinas de control numérico. Comunicación en congreso. 24 Congreso de Innovación Educativa en las Enseñanzas Técnicas (2016). Cádiz, España. 2016
Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;G. Centeno;Borrego, Marcos:
Teaching and learning of manufacturing engineering through virtualization of processes on CNC machines. Ponencia en Congreso. 24th University Educational Innovation Congress on Technical Education. Cadiz. 2016
Teaching and learning of manufacturing engineering through virtualization of processes on CNC machines. Ponencia en Congreso. 24th University Educational Innovation Congress on Technical Education. Cadiz. 2016
G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Multidisciplinary learning of manufacturing engineering through bachelor and master theses in incremental sheet forming. Comunicación en congreso. 22nd Symposium on New Frontiers in Materials Processing and Manufacturing Engineering Training and Learning. ALMADÉN (CIUDAD REAL). 2016
Multidisciplinary learning of manufacturing engineering through bachelor and master theses in incremental sheet forming. Comunicación en congreso. 22nd Symposium on New Frontiers in Materials Processing and Manufacturing Engineering Training and Learning. ALMADÉN (CIUDAD REAL). 2016
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Teaching experience for the virtualization of machine tools and simulation of manufacturing operations. Comunicación en congreso. 22nd Symposium on New Frontiers in Materials Processing and Manufacturing Engineering Training and Learning. ALMADÉN (CIUDAD REAL). 2016
Teaching experience for the virtualization of machine tools and simulation of manufacturing operations. Comunicación en congreso. 22nd Symposium on New Frontiers in Materials Processing and Manufacturing Engineering Training and Learning. ALMADÉN (CIUDAD REAL). 2016
G. Centeno;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;Borrego, Marcos;Vallellano-Martin, Carpoforo:
A numerical study of the stress/strain evolution in single-point incremental forming of AA2024-T3 sheets. Comunicación en congreso. Advances in Materials & Processing Technologies. Leganés (Madrid), España. 2015
A numerical study of the stress/strain evolution in single-point incremental forming of AA2024-T3 sheets. Comunicación en congreso. Advances in Materials & Processing Technologies. Leganés (Madrid), España. 2015
Silva, Maria Beatriz;Martínez-Donaire, Andrés Jesús;G. Centeno;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Firmé-martins, Paulo Antonio:
Forming limits by necking and fracture in sheet metal forming. Comunicación en congreso. 6th Manufacturing Engineering Society International Conference. Barcelona (España). 2015
Forming limits by necking and fracture in sheet metal forming. Comunicación en congreso. 6th Manufacturing Engineering Society International Conference. Barcelona (España). 2015
Borrego, Marcos;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
On the study of the single-stage hole flanging process by SPIF. Ponencia en Congreso. 6th Manufacturing Engineering Society International Conference. Barcelona (Spain). 2015
On the study of the single-stage hole flanging process by SPIF. Ponencia en Congreso. 6th Manufacturing Engineering Society International Conference. Barcelona (Spain). 2015
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Experiencia docente de fabricación en máquinas de control numérico. Ponencia en Congreso. 22 Congreso de Innovación Educativa en las Enseñanzas Técnicas. ALMADÉN (CIUDAD REAL). 2014
Experiencia docente de fabricación en máquinas de control numérico. Ponencia en Congreso. 22 Congreso de Innovación Educativa en las Enseñanzas Técnicas. ALMADÉN (CIUDAD REAL). 2014
G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Aprendizaje Multidisciplinar de Tecnologías de Fabricación en Trabajos de Fin de Estudios en el Ámbito de los Procesos de Conformado Incremental. Ponencia en Congreso. 22 Congreso de Innovación Educativa en las Enseñanzas Técnicas. ALMADÉN (CIUDAD REAL). 2014
Aprendizaje Multidisciplinar de Tecnologías de Fabricación en Trabajos de Fin de Estudios en el Ámbito de los Procesos de Conformado Incremental. Ponencia en Congreso. 22 Congreso de Innovación Educativa en las Enseñanzas Técnicas. ALMADÉN (CIUDAD REAL). 2014
G. Centeno;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Martínez-palmeth, Luis Humberto;Morales-Palma, Domingo;Suntaxi, Carlos;Garcia-Lomas-Jung, Francisco Javier:
Experimental Study on the Evaluation of Necking and Fracture Strains in Sheet Metal Forming Processes. Ponencia en Congreso. 5th Manufacturing Engineering Society International Conference. Zaragoza, España. 2013
Experimental Study on the Evaluation of Necking and Fracture Strains in Sheet Metal Forming Processes. Ponencia en Congreso. 5th Manufacturing Engineering Society International Conference. Zaragoza, España. 2013
Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Martínez-Donaire, Andrés Jesús;G. Centeno;Garcia-Lomas-Jung, Francisco Javier:
INFLUENCE OF PUNCH RADIUS ON THE FORMABILITY OF AA7075-O SHEETS. Ponencia en Congreso. THE 14TH INTERNATIONAL CONFERENCE ON METAL FORMING. CRACOVIA, POLONIA. 2012
INFLUENCE OF PUNCH RADIUS ON THE FORMABILITY OF AA7075-O SHEETS. Ponencia en Congreso. THE 14TH INTERNATIONAL CONFERENCE ON METAL FORMING. CRACOVIA, POLONIA. 2012
Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
Experimental and numerical analysis of the failure of AA7075-O stretch-bend sheets. Ponencia en Congreso. THE 14TH INTERNATIONAL CONFERENCE ON METAL FORMING. CRACOVIA, POLONIA. 2012
Experimental and numerical analysis of the failure of AA7075-O stretch-bend sheets. Ponencia en Congreso. THE 14TH INTERNATIONAL CONFERENCE ON METAL FORMING. CRACOVIA, POLONIA. 2012
Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;G. Centeno;Morales-Palma, Domingo;Doblas-Charneco, Francisco Javier;Garcia-Lomas-Jung, Francisco Javier:
TIME-DEPENDENT METHODOLOGY FOR THE EXPERIMENTAL EVALUATION OF THE ONSET OF NECKING UNDER THROUGH THICKNESS STRAIN GRADIENTS. Ponencia en Congreso. Forming Technology Forum 12. ZURICH, SUIZA. 2012
TIME-DEPENDENT METHODOLOGY FOR THE EXPERIMENTAL EVALUATION OF THE ONSET OF NECKING UNDER THROUGH THICKNESS STRAIN GRADIENTS. Ponencia en Congreso. Forming Technology Forum 12. ZURICH, SUIZA. 2012
G. Centeno;Vázquez-Valeo, Jesús;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier;Vallellano-Martin, Carpoforo:
Numerical analysis of the deformation mechanisms in incremental forming of aa2024-t3 sheets. Ponencia en Congreso. 4th Manufacturing Engineering Society Internacional Conference (2011). - CÁDIZ, ESPAÑA. 2011
Numerical analysis of the deformation mechanisms in incremental forming of aa2024-t3 sheets. Ponencia en Congreso. 4th Manufacturing Engineering Society Internacional Conference (2011). - CÁDIZ, ESPAÑA. 2011
G. Centeno;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
NUMERICAL ANALYSIS OF THE DEFORMATION MECHANISM IN INCREMENTAL SHEET FORMING VS. STRETCH-BENDING. Comunicación en congreso. INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY (10) (10.2011.AACHEN, ALEMANIA). AACHEN, ALEMANIA. 2011
NUMERICAL ANALYSIS OF THE DEFORMATION MECHANISM IN INCREMENTAL SHEET FORMING VS. STRETCH-BENDING. Comunicación en congreso. INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY (10) (10.2011.AACHEN, ALEMANIA). AACHEN, ALEMANIA. 2011
Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier:
ON THE USE OF CONCAVE-SIDE RULE AND CRITICAL-DISTANCE METHODS TO PREDICT THE INFLUENCE OF BENDING ON SHEET-METAL FORMABILITY. Comunicación en congreso. THE 13TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2010) () (.2010.BRESCIA, ITALIA). BRESCIA, ITALIA. 2010
ON THE USE OF CONCAVE-SIDE RULE AND CRITICAL-DISTANCE METHODS TO PREDICT THE INFLUENCE OF BENDING ON SHEET-METAL FORMABILITY. Comunicación en congreso. THE 13TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2010) () (.2010.BRESCIA, ITALIA). BRESCIA, ITALIA. 2010
Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier:
PREDICTION OF FORMING LIMIT STRAINS IN METAL SHEETS UNDER STRETCH-BENDING CONDITIONS. Ponencia en Congreso. METAL FORMING (13) (13.2010.TOYOHASHI, JAPÓN). TOYOHASHI, JAPÓN. 2010
PREDICTION OF FORMING LIMIT STRAINS IN METAL SHEETS UNDER STRETCH-BENDING CONDITIONS. Ponencia en Congreso. METAL FORMING (13) (13.2010.TOYOHASHI, JAPÓN). TOYOHASHI, JAPÓN. 2010
Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
EXPERIMENTAL DETECTION OF NECKING IN STRETCH-BENDING CONDITIONS: A CRITICAL REVIEW AND NEW METHODOLOGY. Ponencia en Congreso. METAL FORMING (13) (13.2010.TOYOHASHI, JAPÓN). TOYOHASHI, JAPÓN. 2010
EXPERIMENTAL DETECTION OF NECKING IN STRETCH-BENDING CONDITIONS: A CRITICAL REVIEW AND NEW METHODOLOGY. Ponencia en Congreso. METAL FORMING (13) (13.2010.TOYOHASHI, JAPÓN). TOYOHASHI, JAPÓN. 2010
Doblas-Charneco, Francisco Javier;G. Centeno;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
OPTIMIZACIÓN DE PROCESOS DE TREFILADO MULTI-ETAPA MEDIANTE MÉTODOS DE BÚSQUEDA DIRECTA.. Ponencia en Congreso. IX CONGRESO IBEROAMERICANO DE INGENIERÍA MECÁNICA (2009).LAS PALMAS DE GRAN CANARIA). LAS PALMAS DE GRAN CANARIA. 2009
OPTIMIZACIÓN DE PROCESOS DE TREFILADO MULTI-ETAPA MEDIANTE MÉTODOS DE BÚSQUEDA DIRECTA.. Ponencia en Congreso. IX CONGRESO IBEROAMERICANO DE INGENIERÍA MECÁNICA (2009).LAS PALMAS DE GRAN CANARIA). LAS PALMAS DE GRAN CANARIA. 2009
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier:
BENDING EFFECT IN THE FAILURE OF STRETCH-BEND METAL SHEETS. Ponencia en Congreso. INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (12) (12.2009.ENSCHEDE (HOLANDA)). ENSCHEDE (HOLANDA). 2009
BENDING EFFECT IN THE FAILURE OF STRETCH-BEND METAL SHEETS. Ponencia en Congreso. INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (12) (12.2009.ENSCHEDE (HOLANDA)). ENSCHEDE (HOLANDA). 2009
Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
EXPERIMENTAL DETECTION OF THE ONSET OF NECKING IN STRETCH-BENDING. Ponencia en Congreso. THIRD MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE (MESIC09) (3) (3.2009.ALCOY, SPAIN). ALCOY, SPAIN. 2009
EXPERIMENTAL DETECTION OF THE ONSET OF NECKING IN STRETCH-BENDING. Ponencia en Congreso. THIRD MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE (MESIC09) (3) (3.2009.ALCOY, SPAIN). ALCOY, SPAIN. 2009
Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
ON THE STUDY OF THE EFFECT OF BENDING IN THE FORMABILITY OF METAL SHEETS. Comunicación en congreso. INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES (NUMISHEET) (7) (7.2008.INTERLAKEN, SWITZERLAND). INTERLAKEN, SWITZERLAND. 2008
ON THE STUDY OF THE EFFECT OF BENDING IN THE FORMABILITY OF METAL SHEETS. Comunicación en congreso. INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES (NUMISHEET) (7) (7.2008.INTERLAKEN, SWITZERLAND). INTERLAKEN, SWITZERLAND. 2008
Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier:
STRAIN GRADIENT EFFECT IN THE FAILURE OF STRETCH-BEND METAL SHEETS. Comunicación en congreso. INTERNATIONAL RESEARCH/EXPERT CONFERENCE ¿TRENDS IN THE DEVELOPMENT OF MACHINERY AND ASSOCIATED TECHNOLOGY¿, TMT 2008 (12) (12.2008.ISTAMBUL (TURKEY)). ISTAMBUL (TURKEY). 2008
STRAIN GRADIENT EFFECT IN THE FAILURE OF STRETCH-BEND METAL SHEETS. Comunicación en congreso. INTERNATIONAL RESEARCH/EXPERT CONFERENCE ¿TRENDS IN THE DEVELOPMENT OF MACHINERY AND ASSOCIATED TECHNOLOGY¿, TMT 2008 (12) (12.2008.ISTAMBUL (TURKEY)). ISTAMBUL (TURKEY). 2008
Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
EXPERIMENTAL AND NUMERICAL ANALYSIS OF DUCTILE FAILURE OF BIAXIALLY STRETCHED SHEETS OF AA2024-T3. Poster en Congreso. INTERNATIONAL CONFERENCE ON ADVANCED COMPUTATIONAL ENGINEERING AND EXPERIMENTING (ACE-X). (1) (1.2007.ALVOR, PORTUGAL.). ALVOR, PORTUGAL.. 2007
EXPERIMENTAL AND NUMERICAL ANALYSIS OF DUCTILE FAILURE OF BIAXIALLY STRETCHED SHEETS OF AA2024-T3. Poster en Congreso. INTERNATIONAL CONFERENCE ON ADVANCED COMPUTATIONAL ENGINEERING AND EXPERIMENTING (ACE-X). (1) (1.2007.ALVOR, PORTUGAL.). ALVOR, PORTUGAL.. 2007
Bravo-Aranda, Gabriel;Morales-Palma, Domingo;Martin-Navarro, Antonio F.;Hernandez-Rodriguez, Francisco:
DESIGN RATIONALE AS A PRINCIPLE FOR DEVELOPING DESING KNOWLEDGE MANAGEMENT SYSTEMS. Comunicación en congreso. WORLD MULTI-CONFERENCE ON SYSTEMICS, CYBERNETICS AND INFORMATICS (9) (9.2005.ORLANDO, FLORIDA (USA)). ORLANDO, FLORIDA (USA). 2005
DESIGN RATIONALE AS A PRINCIPLE FOR DEVELOPING DESING KNOWLEDGE MANAGEMENT SYSTEMS. Comunicación en congreso. WORLD MULTI-CONFERENCE ON SYSTEMICS, CYBERNETICS AND INFORMATICS (9) (9.2005.ORLANDO, FLORIDA (USA)). ORLANDO, FLORIDA (USA). 2005
Bravo-Aranda, Gabriel;Morales-Palma, Domingo;Martin-Navarro, Antonio F.;Hernandez-Rodriguez, Francisco:
ESTRUCTURACIÓN Y REPRESENTACIÓN DE CONOCIMIENTO TÉCNICO RELATIVO AL DISEÑO DE UNA FAMILIA DE PRODUCTOS INDUSTRIALES. Comunicación en congreso. CONGRESO INTERNACIONAL DE INGENIERÍA DE PROYECTOS (7.2003.PAMPLONA, ESPAÑA). PAMPLONA, ESPAÑA. 2003
ESTRUCTURACIÓN Y REPRESENTACIÓN DE CONOCIMIENTO TÉCNICO RELATIVO AL DISEÑO DE UNA FAMILIA DE PRODUCTOS INDUSTRIALES. Comunicación en congreso. CONGRESO INTERNACIONAL DE INGENIERÍA DE PROYECTOS (7.2003.PAMPLONA, ESPAÑA). PAMPLONA, ESPAÑA. 2003
Morales-Palma, Domingo;Bravo-Aranda, Gabriel;Martin-Navarro, Antonio F.;Hernandez-Rodriguez, Francisco:
HERRAMIENTA INFORMÁTICA PARA LA CONSULTA Y EL MANTENIMIENTO DE UNA BASE DE CONOCIMIENTOS. Comunicación en congreso. CONGRESO INTERNACIONAL DE INGENIERÍA DE PROYECTOS (7.2003.PAMPLONA, ESPAÑA). PAMPLONA, ESPAÑA. 2003
HERRAMIENTA INFORMÁTICA PARA LA CONSULTA Y EL MANTENIMIENTO DE UNA BASE DE CONOCIMIENTOS. Comunicación en congreso. CONGRESO INTERNACIONAL DE INGENIERÍA DE PROYECTOS (7.2003.PAMPLONA, ESPAÑA). PAMPLONA, ESPAÑA. 2003
Bravo-Aranda, Gabriel;Morales-Palma, Domingo;Martin-Navarro, Antonio F.;Hernandez-Rodriguez, Francisco;Major-,Virgilio:
UN PROYECTO DE GESTIÓN DEL CONOCIMIENTO TÉCNICO RELATIVO AL DISEÑO Y FABRICACIÓN DE PRODUCTOS INDUSTRIALES. Comunicación en congreso. CONGRESO INTERNACIONAL DE INGENIERÍA DE PROYECTOS (6.2002.BARCELONA). . 2002
UN PROYECTO DE GESTIÓN DEL CONOCIMIENTO TÉCNICO RELATIVO AL DISEÑO Y FABRICACIÓN DE PRODUCTOS INDUSTRIALES. Comunicación en congreso. CONGRESO INTERNACIONAL DE INGENIERÍA DE PROYECTOS (6.2002.BARCELONA). . 2002
Artículos publicados
Suntaxi, Carlos;G. Centeno;Rosa-sainz, Ana;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Numerical Modelling of Conventional and Incremental Forming of Thin-Walled Tube. Key Engineering Materials. 2022. Vol: 926. Pág. 768-775. 10.4028/p-dp1242.
Numerical Modelling of Conventional and Incremental Forming of Thin-Walled Tube. Key Engineering Materials. 2022. Vol: 926. Pág. 768-775. 10.4028/p-dp1242.
López-fernández, José Andrés;G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Stretch-flanging of AA2024-T3 sheet by single-stage SPIF. Thin-Walled Structures. 2021. Vol: 160. Núm: 107338. 10.1016/j.tws.2020.107338.
Stretch-flanging of AA2024-T3 sheet by single-stage SPIF. Thin-Walled Structures. 2021. Vol: 160. Núm: 107338. 10.1016/j.tws.2020.107338.
Arista, Rebeca;MAS-MORATE, FERNANDO;Morales-Palma, Domingo;Oliva, Manuel;Vallellano-Martin, Carpoforo:
A Preliminary Ontology-Based Engineering Application to Industrial System Reconfiguration in Conceptual Phase. CEUR Workshop Proceedings. 2021. Vol: 2969.
A Preliminary Ontology-Based Engineering Application to Industrial System Reconfiguration in Conceptual Phase. CEUR Workshop Proceedings. 2021. Vol: 2969.
Morales-Palma, Domingo;Borrego, Marcos;López-fernández, Jo¿e Andrés;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Numerical analysis of necking in stretch-bending based on modified maximum force criteria. IOP Conference Series: Materials Science and Engineering. 2021. Vol: 1193. Núm: 012081. 10.1088/1757-899X/1193/1/012081.
Numerical analysis of necking in stretch-bending based on modified maximum force criteria. IOP Conference Series: Materials Science and Engineering. 2021. Vol: 1193. Núm: 012081. 10.1088/1757-899X/1193/1/012081.
Flores, G.;Palomo, David;Martínez-Donaire, Andrés Jesús;Borrego, Marcos;López-fernández, José Andrés;Morales-Palma, Domingo;G. Centeno;Vallellano-Martin, Carpoforo:
Design for FDM of flexible tooling for manufacturing aeronautical components by incremental sheet forming. IOP Conference Series: Materials Science and Engineering. 2021. Vol: 1193. Núm: 012042. 10.1088/1757-899X/1193/1/012042.
Design for FDM of flexible tooling for manufacturing aeronautical components by incremental sheet forming. IOP Conference Series: Materials Science and Engineering. 2021. Vol: 1193. Núm: 012042. 10.1088/1757-899X/1193/1/012042.
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
On the use of strain path independent metrics and critical distance rule for predicting failure of AA7075-O stretch-bend sheets. Materials. 2020. Vol: 13. Núm: 3660. 10.3390/ma13173660.
On the use of strain path independent metrics and critical distance rule for predicting failure of AA7075-O stretch-bend sheets. Materials. 2020. Vol: 13. Núm: 3660. 10.3390/ma13173660.
Borrego, Marcos;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Analysis of Flangeability by Single-Stage SPIF and Press-Working in AA7075-O Sheet. Journal of Manufacturing Science and Engineering. 2020. Vol: 143. 10.1115/1.4047997.
Analysis of Flangeability by Single-Stage SPIF and Press-Working in AA7075-O Sheet. Journal of Manufacturing Science and Engineering. 2020. Vol: 143. 10.1115/1.4047997.
Borrego, Marcos;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Analysis of formability in conventional hole flanging of AA7075-O sheets: punch edge radius effect and limitations of the FLC. International Journal of Material Forming. 2019. 10.1007/s12289-019-01487-2.
Analysis of formability in conventional hole flanging of AA7075-O sheets: punch edge radius effect and limitations of the FLC. International Journal of Material Forming. 2019. 10.1007/s12289-019-01487-2.
Lopez-fernandez, J. A.;G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Critical evaluation of the formability of AA2024-T3 sheet deformed by single-point incremental forming. Dyna. 2019. Vol: 94. Núm: 5. Pág. 523-529. http://dx.doi.org/10.6036/9141.
Critical evaluation of the formability of AA2024-T3 sheet deformed by single-point incremental forming. Dyna. 2019. Vol: 94. Núm: 5. Pág. 523-529. http://dx.doi.org/10.6036/9141.
Martínez-Donaire, Andrés Jesús;Borrego, Marcos;Morales-Palma, Domingo;G. Centeno;Vallellano-Martin, Carpoforo:
Analysis of the influence of stress triaxiality on formability of hole-flanging by single-stage SPIF. International Journal of Mechanical Sciences. 2019. Vol: 151. Pág. 76-84. 10.1016/j.ijmecsci.2018.11.006.
Analysis of the influence of stress triaxiality on formability of hole-flanging by single-stage SPIF. International Journal of Mechanical Sciences. 2019. Vol: 151. Pág. 76-84. 10.1016/j.ijmecsci.2018.11.006.
Morales-Palma, Domingo;Borrego, Marcos;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Numerical study on the thickness homogenization in hole-flanging by single-point incremental forming. Journal of Physics: Conference Series. 2018. Vol: 1063. Pág. 1-6. 10.1088/1742-6596/1063/1/012183.
Numerical study on the thickness homogenization in hole-flanging by single-point incremental forming. Journal of Physics: Conference Series. 2018. Vol: 1063. Pág. 1-6. 10.1088/1742-6596/1063/1/012183.
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Borrego, Marcos;G. Centeno;Vallellano-Martin, Carpoforo:
On the effect of stress state on the failure limits of hole-flanged parts formed by SPIF. Journal of Physics: Conference Series. 2018. Vol: 1063. Pág. 1-6. 10.1088/1742-6596/1063/1/012151.
On the effect of stress state on the failure limits of hole-flanged parts formed by SPIF. Journal of Physics: Conference Series. 2018. Vol: 1063. Pág. 1-6. 10.1088/1742-6596/1063/1/012151.
G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Experimental and numerical analysis of the flanging process by SPIF. Journal of Physics: Conference Series. 2018. Vol: 1063. Pág. 1-6. 10.1088/1742-6596/1063/1/012086.
Experimental and numerical analysis of the flanging process by SPIF. Journal of Physics: Conference Series. 2018. Vol: 1063. Pág. 1-6. 10.1088/1742-6596/1063/1/012086.
Morales-Palma, Domingo;Borrego, Marcos;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Optimization of Hole-Flanging by Single Point Incremental Forming in Two Stages. Materials. 2018. Vol: 11. Núm: 2029. 10.3390/ma11102029.
Optimization of Hole-Flanging by Single Point Incremental Forming in Two Stages. Materials. 2018. Vol: 11. Núm: 2029. 10.3390/ma11102029.
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Teaching and Learning of Manufacturing Engineering through Virtualization of Processes on CNC Machines. Materials Science Forum. 2017. Vol: 903. Pág. 112-119. 10.4028/www.scientific.net/MSF.903.112.
Teaching and Learning of Manufacturing Engineering through Virtualization of Processes on CNC Machines. Materials Science Forum. 2017. Vol: 903. Pág. 112-119. 10.4028/www.scientific.net/MSF.903.112.
G. Centeno;Martínez-Donaire, Andrés Jesús;Bagudanch, Isabel;Morales-Palma, Domingo;Garcia-romeu, Maria Luisa;Vallellano-Martin, Carpoforo:
Revisiting Formability and Failure of AISI304 Sheets in SPIF: Experimental Approach and Numerical Validation. Metals. 2017. Vol: 7. Núm: 12. 10.3390/met7120531.
Revisiting Formability and Failure of AISI304 Sheets in SPIF: Experimental Approach and Numerical Validation. Metals. 2017. Vol: 7. Núm: 12. 10.3390/met7120531.
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo:
On the Use of Maximum Force Criteria to Predict Localised Necking in Metal Sheets under Stretch-Bending. Metals. 2017. Vol: 7. Núm: 11. 10.3390/met7110469.
On the Use of Maximum Force Criteria to Predict Localised Necking in Metal Sheets under Stretch-Bending. Metals. 2017. Vol: 7. Núm: 11. 10.3390/met7110469.
G. Centeno;Morales-Palma, Domingo;González Pérez Somarriba, B.;Bagudanch, I.;Egea Guerrero, J.j.;González Pérez, L.m.;García Romeu, M.l.;Vallellano-Martin, Carpoforo:
A Functional Methodology on the Manufacturing of Customized Polymeric Cranial Prostheses from CAT using SPIF. Rapid Prototyping Journal. 2017. Vol: 23. Núm: 4.
A Functional Methodology on the Manufacturing of Customized Polymeric Cranial Prostheses from CAT using SPIF. Rapid Prototyping Journal. 2017. Vol: 23. Núm: 4.
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Caballero, A;Borrego, Marcos;G. Centeno;Vallellano-Martin, Carpoforo:
Numerical explicit analysis of hole flanging by single-stage incremental forming. Procedia Manufacturing. 2017. Vol: 13. Pág. 132-138. 10.1016/j.promfg.2017.09.019.
Numerical explicit analysis of hole flanging by single-stage incremental forming. Procedia Manufacturing. 2017. Vol: 13. Pág. 132-138. 10.1016/j.promfg.2017.09.019.
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;G. Centeno;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Teaching & Learning of Sheet Metal Forming Processes Using DEFORM-3D. Materials Science Forum. 2017. Vol: 903. Pág. 48-55. 10.4028/www.scientific.net/MSF.903.48.
Teaching & Learning of Sheet Metal Forming Processes Using DEFORM-3D. Materials Science Forum. 2017. Vol: 903. Pág. 48-55. 10.4028/www.scientific.net/MSF.903.48.
Morales-Palma, Domingo;Borrego, Marcos;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Preliminary investigation on homogenization of the thickness distribution in hole-flanging by SPIF. Procedia Manufacturing. 2017. Vol: 13. Pág. 124-131. 10.1016/j.promfg.2017.09.101 .
Preliminary investigation on homogenization of the thickness distribution in hole-flanging by SPIF. Procedia Manufacturing. 2017. Vol: 13. Pág. 124-131. 10.1016/j.promfg.2017.09.101 .
G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Multidisciplinary learning of manufacturing engineering through bachelor and master theses in incremental sheet forming. Materials Science Forum. 2016. Vol: 853. Pág. 58-63. http://dx.doi.org/10.4028/www.scientific.net/MSF.853.58.
Multidisciplinary learning of manufacturing engineering through bachelor and master theses in incremental sheet forming. Materials Science Forum. 2016. Vol: 853. Pág. 58-63. http://dx.doi.org/10.4028/www.scientific.net/MSF.853.58.
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Teaching experience for the virtualization of machine tools and simulation of manufacturing operations. Materials Science Forum. 2016. Vol: 853. Pág. 79-84. http://dx.doi.org/10.4028/www.scientific.net/MSF.853.79.
Teaching experience for the virtualization of machine tools and simulation of manufacturing operations. Materials Science Forum. 2016. Vol: 853. Pág. 79-84. http://dx.doi.org/10.4028/www.scientific.net/MSF.853.79.
Borrego, Marcos;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Experimental study of hole-flanging by single-stage incremental sheet forming. Journal of Materials Processing Technology. 2016. Vol: 237. Pág. 320-330. http://dx.doi.org/10.1016/j.jmatprotec.2016.06.026.
Experimental study of hole-flanging by single-stage incremental sheet forming. Journal of Materials Processing Technology. 2016. Vol: 237. Pág. 320-330. http://dx.doi.org/10.1016/j.jmatprotec.2016.06.026.
Silva, M. Beatriz;Martínez-Donaire, Andrés Jesús;G. Centeno;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Martins, Paulo A. F.:
Recent Approaches for the Determination of Forming Limits by Necking and Fracture in Sheet Metal Forming. Procedia Engineering. 2015. Vol: 132. Pág. 342-349. http://dx.doi.org/10.1016/j.proeng.2015.12.504.
Recent Approaches for the Determination of Forming Limits by Necking and Fracture in Sheet Metal Forming. Procedia Engineering. 2015. Vol: 132. Pág. 342-349. http://dx.doi.org/10.1016/j.proeng.2015.12.504.
Borrego, Marcos;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
On the Study of the Single-stage Hole-flanging Process by SPIF. Procedia Engineering. 2015. Vol: 132. Pág. 290-297. http://dx.doi.org/10.1016/j.proeng.2015.12.497.
On the Study of the Single-stage Hole-flanging Process by SPIF. Procedia Engineering. 2015. Vol: 132. Pág. 290-297. http://dx.doi.org/10.1016/j.proeng.2015.12.497.
Morales-Palma, Domingo;G. Centeno;Vallellano-Martin, Carpoforo;Doblas-Charneco, Francisco Javier;Martínez-Donaire, Andrés Jesús;Estevez-Urra, Aida;Garcia-Lomas-Jung, Francisco Javier:
Self-Evaluation E-Learning System for Manufacturing Engineering Subjects. Materials Science Forum. 2013. Vol: 759. Pág. 121-128. 10.4028/www.scientific.net/MSF.759.121.
Self-Evaluation E-Learning System for Manufacturing Engineering Subjects. Materials Science Forum. 2013. Vol: 759. Pág. 121-128. 10.4028/www.scientific.net/MSF.759.121.
Estevez-Urra, Aida;Doblas-Charneco, Francisco Javier;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;G. Centeno;Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier:
Teaching Experience on Metal Forming Processes through Case Study Methodology. Materials Science Forum. 2013. Vol: 759. Pág. 39-46. 10.4028/www.scientific.net/MSF.759.39.
Teaching Experience on Metal Forming Processes through Case Study Methodology. Materials Science Forum. 2013. Vol: 759. Pág. 39-46. 10.4028/www.scientific.net/MSF.759.39.
Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier:
Assessment of the effect of the through-thickness strain/stress gradient on the formability of stretch-bend metal sheets. Materials & Design. 2013. Vol: 50. Pág. 798-809. 10.1016/j.matdes.2013.03.086.
Assessment of the effect of the through-thickness strain/stress gradient on the formability of stretch-bend metal sheets. Materials & Design. 2013. Vol: 50. Pág. 798-809. 10.1016/j.matdes.2013.03.086.
G. Centeno;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Martínez-palmeth, Luis Humberto;Morales-Palma, Domingo;Suntaxi, Carlos;Garcia-Lomas-Jung, Francisco Javier:
Experimental Study on the Evaluation of Necking and Fracture Strains in Sheet Metal Forming Processes . Procedia Engineering. 2013. Vol: 63. Pág. 650-658.
Experimental Study on the Evaluation of Necking and Fracture Strains in Sheet Metal Forming Processes . Procedia Engineering. 2013. Vol: 63. Pág. 650-658.
Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
Experimental and Numerical Analysis of the Failure of AA7075-O Stretch-Bend Sheets. Steel Research International. 2012. Vol: Sp.Ed. Metal Forming 2012. Pág. 251-254.
Experimental and Numerical Analysis of the Failure of AA7075-O Stretch-Bend Sheets. Steel Research International. 2012. Vol: Sp.Ed. Metal Forming 2012. Pág. 251-254.
Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Martínez-Donaire, Andrés Jesús;G. Centeno;Garcia-Lomas-Jung, Francisco Javier:
Influence of Punch Radius on the Formability of AA7075-O Sheets. Steel Research International. 2012. Vol: Sp.Ed. Metal Forming. Pág. 247-250.
Influence of Punch Radius on the Formability of AA7075-O Sheets. Steel Research International. 2012. Vol: Sp.Ed. Metal Forming. Pág. 247-250.
Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
EXPERIMENTAL DETECTION OF NECKING IN STRETCH-BENDING CONDITIONS: A CRITICAL REVIEW AND NEW METHODOLOGY.. Steel Research International. 2010. Vol: 81. Núm: 9. Pág. 785-788.
EXPERIMENTAL DETECTION OF NECKING IN STRETCH-BENDING CONDITIONS: A CRITICAL REVIEW AND NEW METHODOLOGY.. Steel Research International. 2010. Vol: 81. Núm: 9. Pág. 785-788.
Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier:
PREDICTION OF FORMING LIMIT STRAINS IN METAL SHEETS UNDER STRETCH-BENDING CONDITIONS.. Steel Research International. 2010. Vol: 81. Núm: 9. Pág. 781-784.
PREDICTION OF FORMING LIMIT STRAINS IN METAL SHEETS UNDER STRETCH-BENDING CONDITIONS.. Steel Research International. 2010. Vol: 81. Núm: 9. Pág. 781-784.
Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
On the Experimental Detection of Necking in Stretch-Bending Tests. AMERICAN INSTITUTE OF PHYSICS 978-0-7354-0722-0. 2009. Vol: 1181. Pág. 500-508. https://doi.org/10.1063/1.3273668.
On the Experimental Detection of Necking in Stretch-Bending Tests. AMERICAN INSTITUTE OF PHYSICS 978-0-7354-0722-0. 2009. Vol: 1181. Pág. 500-508. https://doi.org/10.1063/1.3273668.
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier:
BENDING EFFECT IN THE FAILURE OF STRETCH-BEND METAL SHEETS. International Journal of Material Forming. 2009. Vol: 2. Pág. 813-816.
BENDING EFFECT IN THE FAILURE OF STRETCH-BEND METAL SHEETS. International Journal of Material Forming. 2009. Vol: 2. Pág. 813-816.
Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
A STUDY TO PREDICT FAILURE IN BIAXIALLY STRETCHED SHEETS OF ALUMINUM ALLOY 2024-T3. Materials and Manufacturing Processes. 2008. Vol: 23. Núm: 3. Pág. 303-310.
A STUDY TO PREDICT FAILURE IN BIAXIALLY STRETCHED SHEETS OF ALUMINUM ALLOY 2024-T3. Materials and Manufacturing Processes. 2008. Vol: 23. Núm: 3. Pág. 303-310.
Patentes
Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Beltran-calero, Juan;Gil-báez, Pedro;Cala-romero, Antonio: Arandela para Establecer Continuidad Eléctrica. Número de patente: ES 2552589 B2
Tesis dirigidas o codirigidas
(Doctorando no grabado):
Analysis of single stage SPIF process applied to the hole flanging operation. Tesis Doctoral. 2018
Analysis of single stage SPIF process applied to the hole flanging operation. Tesis Doctoral. 2018
